Instrument Panel Cluster Lens
WARNING: This page is about a different car, the 2020 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Carefully position the cluster lens (2), over the face of the Instrument Panel Cluster (IPC) (1).
- Press firmly and evenly on the lens, until each of the latches is fully engaged around the perimeter of the IPC housing.
- Install the IPC into the instrument panel. Refer to MODULE, INSTRUMENT PANEL CLUSTER (IPC), INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.