Module, Powertrain Control (Pcm): Removal: Diesel
WARNING: This page is about a different car, the 2020 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Disconnect the Powertrain Control Module (2) (PCM) wire harness connectors (1).
- Remove fasteners (3), and (2) to remove the Powertrain Control Module (PCM) (1).