LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2019 >> RVR ES, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Combination Meter) >> On-Vehicle Service >> Service Reminder Function Set >> How To Operate The Scan Tool (M.U.T.-III) >> 5. Optional Int Schedule Setting
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

5. Optional Int Schedule Setting

WARNING: This page is about a different car, the 2017 Mitsubishi Mirage G4. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: If the current schedule is set to the "Optional INT" by executing "5. Periodic reminder schedule set," the "set value" cannot be input. Therefore, set it to the schedule other than the "Optional INT" once, and then execute "7. Optional INT schedule setting."

In addition to the existing schedule, the optional service reminder schedule can be set.

  1. On the "Service Reminder" screen, select "7 Optional INT schedule setting."
    NOTE: The screen indicates that the optional schedule (Nos. 12 and 13 in the data list) has not been set.
    Fig 1: Screen Display - Service Reminder (7 Optional INT Schedule Setting)
    G11281004Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Set the optional schedule (distance or month) of the "Set value."
    NOTE: Either input of distance or month can execute the setting.
  3. Press the "OK" button.
    Fig 2: Screen Display - Set Value
    G05385273Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. The optional schedule is set. The set schedule becomes effective by executing "5 Periodic reminder schedule set" and setting the schedule to "Optional INT."
    NOTE: The screen indicates that "2 month" has been added to the optional schedule (No. 13 in the data list). (The distance of No. 12 in the data list has not been set).
    Fig 3: Screen Display - Optional Schedule
    G05385274Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.