DTC Set Conditions
Check Conditions <Output Functional High>
- Voltage of battery: 10 volts or more.
- Transmission fluid temperature: 20°C (-4°F) or more.
- Transmission range switch position: D or R.
- Accelerator position: Less than 1.23 V.
- Vehicle speed: Less than 3 km/h (2 mph).
- Turbine speed at before "N to D", "N to R" or "P to R" shifting: More than 500 r/min.
- Time since shifting: Less than defined time*.
NOTE:
*: Defined time
- N to D shifting: 0.4 second or less
- N to R shifting: 0.3 second or less
- P to R shifting: 0.3 second or less
Check Conditions <Output Functional Low>
- Voltage of battery: 10 volts or more.
- Transmission range switch position: D or R.
- Vehicle speed: Less than 3 km/h (2 mph).
- Primary pulley speed - Secondary pulley speed: Less than 120 r/min.
- Forward clutch target pressure: 0.95 MPa (138 psi) or more.
- Turbine speed - Engine speed: Less than 200 r/min.
Judgment Criteria <Output Functional High>
- Turbine speed: 200 r/min or less (3 times).
Judgment Criteria <Output Functional Low>
- Turbine speed - Primary pulley speed: More than 450 r/min (Accumulated 30 seconds).