Power Door Locks With Selective Unlocking Inspection <Vehicles With Electric Retractable Remote Controlled Door Mirrors>

Press the unlock switch on the transmitter once to unlock only the driver's door. Press the unlock switch of the transmitter once again within 2 seconds after the driver's door is unlocked, and check that the front passenger's door, the rear doors and liftgate are unlocked. If they are not unlocked, carry out troubleshooting. Refer to DTC B1A10 Keyless/F.A.S.T. key 1 low BATT.; DTC B1A11 Keyless/F.A.S.T. key 2 low BATT.; DTC B1A12 Keyless/F.A.S.T. key 3 low BATT.; DTC B1A13 Keyless/F.A.S.T. key 4 low BATT.; DTC B1A14 Keyless key 5 low battery; DTC B1A15 Keyless key 6 low battery; DTC B1A16 Keyless key 7 low battery; DTC B1A17 Keyless key 8 low battery .

NOTE: Press the unlock switch on the transmitter once to unlock only the driver's door. When the unlock switch of the transmitter is pressed once again more than 2 seconds after the driver's door is unlocked, only the driver's door is unlocked.

NOTE: The setting of the power door locks with selective unlocking can be changed using the customization function. Confirm which setting is activated before performing these checks. Refer to MULTIMODE KEYLESS ENTRY FUNCTION CHECK <VEHICLES WITH ELECTRIC RETRACTABLE REMOTE CONTROLLED DOOR MIRRORS> .