»A« Dynamic Damper/Damper Band Installation <LH>
CAUTION:
There should be no grease adhered to the rubber part of the dynamic damper.
- Install the dynamic damper in the position (A) shown in the illustration.
Standard value (dimension):
225 ±3 mm (8.9 ±0.1 inch) <LH>
251±3 mm (9.9±0.1 inch) <FWD-RH>
312 ± 3 mm (12.3 ± 0.1 inch) <AWD-RH>
- Secure the damper band.
- Wrap plastic tape around the shaft spline, and then install the inboard joint boot band (small) and inboard joint boot.