DTC C2205: Steering Wheel Sensor System (Internal Error): Diagnosis
- STEP 1. Scan tool (M.U.T.-IIISE) CAN bus diagnostics
.
Use scan tool (M.U.T.-IIISE) to perform the CAN bus diagnosis.
Q: Is the check result normal?
YES : Go to Step 2.
NO : Repair the CAN bus lines (Refer to CAN BUS DIAGNOSTICS TABLE ).
- STEP 2. Scan tool (M.U.T.-IIISE) data list
.
Check the following data list (Refer to DATA LIST REFERENCE TABLE ).
Item No. 21: Steering angle
Q: Is the check result normal?
YES : Go to Step 3.
NO : Replace the steering wheel sensor (Refer to STEERING WHEEL SENSOR ).
- STEP 3. Check whether the DTC is set again
.
Q: Is the DTC C2205 set?
YES : Replace the AWC-ECU (Refer to AWC-ECU <AWD> ).
NO : Intermittent malfunction (Refer to HOW TO COPE WITH INTERMITTENT MALFUNCTION ).