Freeze Frame Data Reference Table
Scan tool (M.U.T-IIISE) can be used to read the freeze frame data (the driving status when the failure occurs) at each diagnostic trouble code detection.
FREEZE FRAME DATA SPECIFICATION
| Item No. | Item | Unit/display contents |
|---|---|---|
| 1 | Odometer | km/mile |
| 4 | Accumulated minute | min |
| 5 | AWC control mode | Mode 1 |
| Mode 2 | ||
| Mode 3 | ||
| Mode 4 | ||
| 9 | ABS status | OFF/ON |
| 17 | ABS/A.S.C. actuation flag | OFF/ON |
| 25 | Coupling torque reduction request (A.S.C.) | OFF/ON |
| 33 | Estimated vehicle speed | km/h/mph |
| 34 | Brake switch | OFF/ON |
| 42 | Parking brake switch/signal | OFF/ON |
| 50 | A.S.C. off switch | OFF/ON |
| 52 | Steering angle | deg |
| 53 | Accelerator position | % |
| 57 | Wheel speed (FL) | km/h/mph |
| 58 | Wheel speed (FR) | km/h/mph |
| 59 | Wheel speed (RL) | km/h/mph |
| 60 | Wheel speed (RR) | km/h/mph |
| 61 | Center coupling torque | Nm |
| 62 | Yaw rate | deg/s |
| 69 | Lateral G | m/s2 |
| 73 | Longitudinal G | m/s2 |
| 77 | Transfer oil temperature | °C/°F |
| 83 | Center coupling oil temperature | °C/°F |
| 89 | Center coupling clutch temperature | °C/°F |
| 92 | Master cylinder pressure | MPa/psi |
| 96 | Brake control torque difference | Nm |
| 103 | A.S.C. equipment information | Not present/present |
| 111 | Handle side | Coding error/Left hand drive/Right hand drive |