LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2020 >> Mirage ES, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Engine Overhaul >> Intake Manifold >> Removal And Installation >> Installation Service Points >> >>B<<Intake Manifold/Intake Manifold Stay Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>>B<<Intake Manifold/Intake Manifold Stay Installation

  1. Install the intake manifold and intake manifold stay temporarily tighten the mounting bolts.
    CAUTION: Check that the sealing surfaces of the intake manifold and intake manifold stay contact securely after temporary tightening.
  2. Tighten the intake manifold and intake manifold stay bolts to the specified torque.

    Tightening torque: 

    Intake manifold: 28 ± 2 N.m (21 ± 1 ft-lb) 

    Intake manifold stay: 19 ± 1 N.m (14.0 ± 0.7 ft-lb) 

scientia non olet · About LEMON Manuals