 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|
- MB992744
- MB992745
- MB992746
- MB992747
- MB992748
- Vehicle communication interface-Lite (V.C.I.-Lite)
- V.C.I.-Lite main harness A (for vehicles with CAN communication)
- V.C.I.-Lite main harness B (for vehicles without CAN communication)
- V.C.I.-Lite USB cable short
- V.C.I.-Lite USB cable long
|
- |
CAN bus diagnostics or DTC. |
 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|
MB991958
- MB991824
- MB991827
- MB991910
- MB991911
- MB991914
- MB991825
- MB991826
M.U.T.-III sub-assembly
- Vehicle communication interface (V.C.I.)
- M.U.T.-III USB cable
- M.U.T.-III main harness A (Vehicles with CAN communication system)
- M.U.T.-III main harness B (Vehicles without CAN communication system)
- M.U.T.-III main harness C (for Chrysler models only)
- M.U.T.-III measurement adapter
- M.U.T.-III trigger harness
|
MB991824-KIT
NOTE:
G: MB991826 M.U.T.-III Trigger Harness is not necessary when pushing V.C.I. ENTER key.
|
CAUTION:
M.U.T.-III main harness A (MB991910) should be used. M.U.T.-III main harness B and C should not be used for this vehicle. CAN bus diagnostics or DTC. |
 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|
MB991223
- MB991219
- MB991220
- MB991221
- MB991222
Harness set
- Check harness
- LED harness
- LED harness adapter
- Probe
|
General service tool (jumper) |
Continuity check and voltage measurement at harness wire or connector
- For checking connector pin contact pressure
- For checking power supply circuit
- For checking power supply circuit
- For connecting a locally sourced tester
|
 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|
MB992006
Extra fine probe |
- |
Continuity check and voltage measurement at harness wire or connector |