Actuator Test Table: Notes

Using scan tool (M.U.T.-III), the following actuators can be forcibly operated:

NOTE:

ABS, TCL and ASC are operated by ASC-ECU.
When ASC-ECU is disabled due to the fail-safe function, the actuator test cannot be performed.
The actuator test can be performed only when the vehicle is stationary.
After the actuator test has been performed, the brake warning light, ABS warning light, ASC indicator light and ASC OFF indicator light illuminate until the ignition switch is turned to the "ON" position again or the communication between scan tool (M.U.T.-III) and ASC-ECU is terminated.