LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2021 >> Mirage G4 LE >> Repair and Diagnosis >> Brakes >> Traction Control >> Active Stability Control System (ASC) >> Diagnosis >> Diagnostic Trouble Code Procedures >> DTC U1195: Coding not completed >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U1195: Coding not completed: Notes

CAUTION:
  • If there is any problem in the CAN bus lines, an incorrect diagnostic trouble code may be set. Prior to this diagnosis, diagnose the CAN bus lines (Refer to CAN BUS DIAGNOSTICS TABLE ).
  • Whenever ECU is replaced, ensure that the CAN bus lines are normal.
  • When the diagnostic trouble code U1195 is set in ASC-ECU, the diagnostic trouble code may also be set in ETACS-ECU. When the diagnostic trouble code is set in ETACS-ECU, carry out the diagnosis of the diagnostic trouble code for ETACS-ECU first.
  • When the hydraulic unit (integrated with ASC-ECU) is replaced, always carry out the calibration of the steering wheel sensor and the G and yaw rate sensor (Refer to STEERING WHEEL SENSOR CALIBRATION  and G AND YAW RATE SENSOR CALIBRATION  ).
scientia non olet · About LEMON Manuals