LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2021 >> Mirage LE >> Repair and Diagnosis >> Electrical >> Gauges >> Combination Meter >> On-Vehicle Service >> Service Reminder Function Set >> How To Set The Schedule
April 5, 2026: LEMON Manuals is launched! Read the announcement.

How To Set The Schedule

  1. Turn the ignition switch to the "LOCK" (OFF) position.
  2. By operating the multi-information display switch, the warning period is displayed on the odometer.
  3. Press the multi-information display switch once for 1.0 seconds or longer.
  4. The service reminder indicator flashes.
  5. While the service reminder indicator flashes, press the multi-information display switch for 1.0 seconds or longer and 3 times consecutively.
  6. The service reminder indicator is turned ON, and the current schedule is displayed on the odometer display.
  7. While the current schedule is displayed, press the multi-information display switch for less than 1.0 seconds and 3 times consecutively.
  8. The odometer display is shifted to the schedule selection mode.
  9. When the multi-information display switch is pressed for less than 1.0 seconds, the schedule is shifted, and when the switch is pressed for 1.0 seconds or longer, the displayed schedule is set.
    NOTE: For schedule, "JPN", "EU", "NAS", "GCC/EXP", "MMAL" and "SEVERE" can also be selected. However, the using shall be for "Normal" only.
  10. The schedule set in Step 9 is displayed for 3 seconds, and the warning period to the next time is displayed.
scientia non olet · About LEMON Manuals