Check Of Freeze Frame Data
WARNING: This page is about a different car, the 2020 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
The freeze frame data can be checked by using the scan tool (M.U.T.-IIISE).
When detecting fault and storing the DTC, the ECU connected to CAN bus line obtains the data before the determination of the DTC and the data when the DTC is determined, and then stores the ECU status of that time. By analyzing each data from scan tool (M.U.T.-IIISE), the troubleshooting can be performed more efficiently. The displayed items are as the table below.
DISPLAY PART DESCRIPTION
| Item No. | Item name | Content | Unit | ||
|---|---|---|---|---|---|
| 01 | Odometer | Total driving distance after the DTC is generated | mile(1) | ||
| 02 | Ignition cycle | Number of times the electric motor switch is turned "OFF (LOCK or ACC)" after the past failure transition | Number of counts is displayed. | ||
| 04 | Accumulated minute | Cumulative time for current malfunction of DTC | min | ||
|
NOTE:
|
|||||