Nominal Resistance Of The Fuel Level Sensor
WARNING: This page is about a different car, the 2020 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the fuel pump and gauge assembly (Refer to On-vehicle Service, FUEL PUMP AND GAUGE ASSEMBLY REPLACEMENT ).
- When float of the fuel level sensor is in stopper positions "F" and "E", ensure that resistance between the fuel level sensor terminal and ground terminal is within the standard value.
Standard value:
Float position Gauge resistance value (ohms) Stopper position "F" 13.0 ± 1.0 Stopper position "E" 120.0 ± 1.0 - When the float is moved slowly between stopper positions "F" and "E", ensure that the resistance is smoothly changing.