Data List Reference Table: Notes
WARNING: This page is about a different car, the 2020 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
| Item No. | Scan tool (M.U.T.-IIISE) display | Check condition | Normal condition |
|---|---|---|---|
| 3 | ECU power supply voltage | Always | Battery positive voltage |
| 9 | IG1 monitor voltage | Always | IG voltage |
| 25 | EV starting circuit output | Other than below | OFF |
| An update button is touched on a registered wireless LAN device. | ON (remains on for five seconds) | ||
| 132 | Electric motor switch | Other than below | OFF |
| The power supply mode of the electric motor switch is ON. | Not OFF | ||
| 133 | Hood open | Close the hood and turn on the power supply mode of the electric motor switch. | Close |
| Open the hood. | Open | ||
| 411 | Device 1 MAC address (top 6) | Always (after a wireless LAN device is registered) | The MAC address displayed on the scan tool (M.U.T.-IIISE) corresponds to that on a wireless LAN device. |
| 412 | Device 1 MAC address (under 6) | ||
| 421 | Device 2 MAC address (top 6) | ||
| 422 | Device 2 MAC address (under 6) |