How To Connect The Scan Tool (M.U.T.-IIISE)
CAUTION:
To prevent damage to scan tool (M.U.T.-IIISE), always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting scan tool (M.U.T.-IIISE).
- Ensure that the ignition switch is at the "LOCK" (OFF) position.
- Start up the personal computer.
- Connect special tool MB992747/M992748 to special tool MB992744 and the personal computer.
- Connect special tool MB992745 to special tool MB992744.
- Connect special tool MB992745 to the data link connector.NOTE: When the special tool MB992745 is connected to the data link connector, the special tool MB992744 indicator light will be illuminated in a green color.
- Start the M.U.T.-IIISE system on the personal computer.
NOTE:
Disconnecting scan tool (M.U.T.-IIISE) is the reverse of the connecting sequence, first making sure that the ignition switch is at the "LOCK" (OFF) position.