Component Function Check
WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- Start engine and warm it up to normal operating temperature.
- Turn A/C switch and blower fan switch ON.
- Check the voltage between ECM harness connector terminals under the following conditions.
| ECM | Voltage (V) | ||
|---|---|---|---|
| Connector | + | - | |
| Terminal | |||
| F52 | 74 | 105 | 0.3 - 4.5 |
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
Refer to DTC DIAGNOSIS PROCEDURE .