DTC Detection Logic
WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
| DTC No. | M.U.T.-III SE screen items (Trouble diagnosis content) |
DTC detecting condition | |
|---|---|---|---|
| B2C20-23 | Starter control relay | Diagnosis condition | Ignition switch ON |
| Signal (terminal) |
|
||
| Threshold | When the starter cut relay status signal transmitted from IPDM E/R via CAN communication is OFF after even though BCM is operating the starter cut relay ON output. | ||
| Diagnosis delay time | 1 second or less | ||