DTC Confirmation Procedure

1. Pull the parking brake switch.
   NOTE: Check the parking brake switch indicator is turn On.
2. Ignition switch OFF.
3. Get out of the vehicle and close all doors.
4. Wait 65 seconds.
   NOTE:

   • Check the parking brake switch indicator turn OFF.
   • If the rear brake caliper is heated, wait an hour so that parking brake switch indicator does not turn OFF.

»: GO TO 2  .

With M.U.T.-III SE

1. Ignition switch ON.
2. Perform self-diagnosis for "EPS/DAST 3".

   Is DTC "C161A-82" detected? 

   YES »: Proceed to diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

   NO-1 »: To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

   NO-2 »: Confirmation after repair: INSPECTION END