| 3 |
ECU power supply voltage |
Always |
Battery positive voltage |
| 9 |
IG1 monitor voltage |
Always |
IG voltage |
| 25 |
EV starting circuit output |
Other than below |
OFF |
| An update button is touched on a registered wireless LAN device. |
ON (remains on for five seconds) |
| 132 |
Electric motor switch |
Other than below |
OFF |
| The power supply mode of the electric motor switch is ON. |
Not OFF |
| 133 |
Hood open |
Close the hood and turn on the power supply mode of the electric motor switch. |
Close |
| Open the hood. |
Open |
| 411 |
Device 1 MAC address (top 6) |
Always (after a wireless LAN device is registered) |
The MAC address displayed on the scan tool (M.U.T.-IIISE) corresponds to that on a wireless LAN device. |
| 412 |
Device 1 MAC address (under 6) |
| 421 |
Device 2 MAC address (top 6) |
| 422 |
Device 2 MAC address (under 6) |