Data List Reference Table
| Item No. | Scan tool (M.U.T.-IIISE) display | Check condition | Normal condition |
|---|---|---|---|
| 1 | Shift information | Selector lever: except R position | Not R |
| Selector lever: R position | R | ||
| 2 | Steering angle information | A steering wheel angle signal is not received. | Disable |
| A steering wheel angle signal is received. | Enable | ||
| 4 | Vehicle speed information | Vehicle stopped | Disable |
| Running | Enable | ||
| 5 | Camera switch | Camera switch: OFF | OFF |
| Camera switch: ON | ON | ||
| 6* | Camera off request | - | OFF |
| - | ON | ||
| 7 | Steering wheel angle | Vehicle stopped (the steering wheel is in the neutral position) | -6 to 6 deg |
| Running | Nearly the same as the steering wheel operation angle <-720 to 720 deg> | ||
| 8 | Picture input signal (Front) | Front-view camera signal is normal | Normal |
| Front-view camera signal is abnormal | Abnormal | ||
| 9 | Picture input signal (Rear) | Rear-view camera signal is normal | Normal |
| Rear-view camera signal is abnormal | Abnormal | ||
| 10 | Picture input signal (Left side) | Side-view camera (LH) signal is normal | Normal |
| Side-view camera (LH) signal is abnormal | Abnormal | ||
| 11 | Picture input signal (Right side) | Side-view camera (RH) signal is normal | Normal |
| Side-view camera (RH) signal is abnormal | Abnormal |
NOTE:
: are displayed, but not used for service and maintenance.