Electric Power Steering (EPS) DTCS
ELECTRIC POWER STEERING (EPS) DTCs
| DTC | Description |
|---|---|
| C1219 | Steering angle sensor signal |
| C1510 | Torque sensor 1 signal malfunction; DTC C1511: Torque sensor 2 signal malfunction |
| C1512 | Torque sensor 1, 2 excessive deviation |
| C1513 | Torque sensor power supply too high; DTC C1514: Torque sensor power supply too low |
| C1517 | Failure action of torque sensor signal |
| C1518 | Torque sensor calibration not completed |
| C1519 | Torque sensor calibration abnormality |
| C1521 | Motor rotation angle sensor failure 1; DTC C1522: Motor rotation angle sensor failure 2 |
| C1531 | Motor output current failure 1; DTC C1532: Motor output current failure 2 |
| C1537 | IG signal failure |
| C1538 | Detection of the steering neutral position deviation |
| C1540 | Power supply voltage too high |
| C1541 | Power supply voltage too low |
| C1543 | IG voltage too high |
| C1550 | ECU internal error |
| C1558 | Invalid Data Received of Wheel speed information |
| C1559 | Lost Communication of Wheel speed information |
| C1564 | Vehicle speed data invalid |
| C1565 | Engine revolution data invalid |
| C1567 | Invalid data received for vehicle speed (CRC); DTC C1568: Invalid data received for vehicle speed (message counter) |
| C1657 | Implausible coding data |
| U0100 | Engine CAN timeout |
| U0121 | ABS/ASC CAN timeout |
| U0126 | SAS CAN timeout |
| U0141 | ETACS CAN timeout |
| U1073 | Bus-off |
| U1190 | No receive fault detect signal |
| U1195 | Coding not completed |
| U1199 | VIN not programmed |
| U119A | VIN mismatch |