Warning Screen: BSW/RCTA

Display content	Message	Factor	Action procedure
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	BSW TEMPORARILY NOT AVAILABLE	Displayed when any of the conditions below is satisfied. Abnormal internal temperature in the ECU The sensors in the ECU are out of permissible temperature range The sensor in the ECU receives noise.	If the warning screen is not displayed normally or if the screen continues to be displayed, carry out the troubleshooting for the BSW. (Refer to DIAGNOSTIC TROUBLE CODE CHART <BSW-ECU (MASTER)> <MASTER> or DIAGNOSTIC TROUBLE CODE CHART <SLAVE>.)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	BSW SERVICE REQUIRED	Displayed when the BSW-ECU fails due to open circuit in the sensor inside the BSW-ECU.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	BSW RADAR BLOCKED	Displayed when the BSW cannot function due to a foreign material adhered on the sensor.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	-	Displayed when an approaching vehicle is detected behind your vehicle during reversing.	If the warning screen is not displayed normally or if the screen continues to be displayed, carry out the troubleshooting for the RCTA. (Refer to DIAGNOSTIC TROUBLE CODE CHART <BSW-ECU (MASTER)> .)