Removal And Installation

CAUTION: When the knock sensor is replaced, initialize the learned value using scan tool (M.U.T.-III) (Refer to INITIALIZATION PROCEDURE FOR LEARNING VALUE IN MFI ENGINE).

Pre-removal Operation	Post-installation Operation
Engine Room Under Cover Front Removal (Refer to UNDER COVER). Oil Filter Removal (Refer to OIL FILTER REPLACEMENT). Oil Filter Cover Removal (Refer to OIL PAN AND TIMING CHAIN CASE).	Oil Filter Cover Installation (Refer to OIL PAN AND TIMING CHAIN CASE). Oil Filter Installation (Refer to OIL FILTER REPLACEMENT). Engine Room Under Cover Front Installation (Refer to UNDER COVER).

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

For the removal and installation procedures, refer to WATER HOSE AND PIPE.