LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2023 >> Outlander ES, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTC/Circuit Diagnosis) (1 Of 5) >> DTC/Circuit Diagnosis >> DTC P0118: ECT Sensor >> DTC Description >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

  1. PRECONDITIONING 

    If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test.

    1. Turn ignition switch OFF and wait at least 10 seconds.
    2. Turn ignition switch ON.
    3. Turn ignition switch OFF and wait at least 10 seconds.

    >>: GO TO 2 

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Turn ignition switch ON and wait at least 5 seconds.
    2. Check DTC.

    Is DTC detected? 

    YES >>: Proceed to DTC DIAGNOSIS PROCEDURE .

    NO-1 >>: To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

    NO-2 >>: Confirmation after repair: INSPECTION END

scientia non olet · About LEMON Manuals