LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2023 >> Outlander ES, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTC/Circuit Diagnosis) (3 Of 5) >> DTC/Circuit Diagnosis >> DTC P06E6: Internal Control Module >> DTC Description >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

  1. PRECONDITIONING 

    TESTING CONDITION:

    Before performing the following procedure, confirm that battery voltage is 11 V or more with ignition switch ON.

    >>

    GO TO 2 

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Turn ignition switch ON and wait at least 10 second.
    2. Turn ignition switch OFF and wait at least 10 seconds.
    3. Repeat step  1 and  2 for 2 times.
    4. Turn ignition switch ON.
    5. Check the DTC.

    Is the DTC detected? 

    YES >>

    Proceed to DTC DIAGNOSIS PROCEDURE .

    NO-1 >>

    To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

    NO-2 >>

    Confirmation after repair: INSPECTION END

scientia non olet · About LEMON Manuals