Component Function Check

1. Turn ignition switch OFF.
2. Disconnect fuel level sensor unit and fuel pump harness connector.
3. Remove fuel level sensor unit. Refer to EXPLODED VIEW .
4. Check resistance between fuel level sensor unit and fuel pump terminals.

   Fuel level sensor unit and fuel pump		Condition		Resistance (kΩ)
   +	-
   Terminal
   3	2	Atmospheric temperature [°C (°F)]	20 (68)	2.3 - 2.7
   			50 (122)	0.79 - 0.90

Is the inspection result normal? 

YES >>

Check intermittent incident. Refer to INTERMITTENT INCIDENT .

NO >>

Refer to DTC DIAGNOSIS PROCEDURE .