DTC Confirmation Procedure
WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
With M.U.T.-III SE
- Ignition switch ON.
- Ignition switch OFF and wait for 1 minute with the driver side door opened.
- Ignition switch ON.
- Check "Self Diagnostic Result" of "BCM" using M.U.T.-III SE.
Is DTC detected?
YES >>
Refer to DIAGNOSIS PROCEDURE .
NO-1 >>
To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .
NO-2 >>
Confirmation after repair: INSPECTION END