Component Inspection

WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

CHECK IGNITION RELAY-2

Ignition switch OFF.
Remove ignition relay-2.

Check continuity between ignition relay-2 terminals.

Ignition relay-2		Condition	Continuity
Terminal		Condition	Continuity
(3)	(5)	12 V direct current supply between terminals (1) and (2).	Existed
(3)	(5)	No current supply	Not existed

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Is the inspection result normal?

YES >>

INSPECTION END

NO >>

Replace ignition relay-2.