Component Inspection

WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

CHECK IGNITION RELAY-3

Ignition switch OFF.
Remove ignition relay-3.

Check continuity between ignition relay-3 terminals.

Ignition relay-3		Condition	Continuity
Terminal		Condition	Continuity
3	4	12 V direct current supply between terminals 1 and 2.	Existed
3	4	No current supply	Not existed

Is the inspection result normal?

YES >>

INSPECTION END

NO >>

Replace ignition relay-3.