ENGINE CONTROL SYSTEM: Commercial Service Tools or/and Repair Part

WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Tool name (TechMate No.)	Description
Leak detector i.e.: (J-41416) Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	Locates the EVAP leak
EVAP service port adapter i.e.: (J-41413-OBD) Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	Applies positive pressure through EVAP service port
Fuel filler cap adapter i.e.: (J-42909) Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	Checks fuel tank vacuum relief valve opening pressure
Socket wrench Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	Removes and installs engine coolant temperature sensor
Oxygen sensor thread cleaneri.e.: (J-43897-18) (J-43897-12) Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	Reconditions the exhaust system threads before installing a new oxygen sensor. Use with anti-seize lubricant shown below. 18 mm diameter with pitch 1.5 mm for Zirconia Oxygen Sensor 12 mm diameter with pitch 1.25 mm for Titania Oxygen Sensor
Anti-seize lubricant i.e.: (Permatex™ 133AR or equivalent meeting MIL specification MIL-A-907) Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	Lubricates oxygen sensor thread cleaning tool when reconditioning exhaust system threads.