ELECTRIC INTAKE VALVE TIMING CONTROL MODULE: Removal & Installation: Removal
WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative and positive battery terminals, then wait at least three minutes. Refer to REMOVAL AND INSTALLATION .
- Remove the engine side cover (LH). Refer to EXPLODED VIEW .
- Partially remove the fender protector (LH). Refer to EXPLODED VIEW .
- Remove the air cleaner resonator. Refer to REMOVAL AND INSTALLATION .
- Disconnect the harness connector from the electric intake valve timing control module.
- Remove the electric intake valve timing control module nuts.
- Remove the electric intake valve timing control module.