Confirmation Procedure
WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Press push-button ignition switch under the following conditions and wait 1 second or more.
- Selector lever: In the P position.
- Brake pedal: Depressed.
- Select "Self Diagnostic Result" mode of "BCM" using M.U.T.-III SE.
Is the DTC detected?
YES >>
Refer to DTC DIAGNOSIS PROCEDURE .
NO-1 >>
To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .
NO-2 >>
Confirmation after repair: INSPECTION END
- Press push-button ignition switch under the following conditions and wait 1 second or more.