Component Function Check
WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Select "HOOD SW (CAN)" or "Hood switch" in "Data List" mode of "IPDM E/R" using M.U.T.-III SE.
- Check "HOOD SW (CAN)" or "Hood switch" indication under the following condition.
Monitor item Condition Indication HOOD SW (CAN) Close the hood Close Open the hood Open Transmits invalid CAN signal NG Hood switch Close the hood Close Open the hood Open Is the indication normal?
YES >>
Hood switch is OK.
NO >>
Refer to DIAGNOSIS PROCEDURE .