Work Support: Notes

WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Function name	Special Function items	Description
ECU Information	-	Display the ECU Information number (part number etc.) of the selected system
Actuator Test	-	Send the drive signal from M.U.T.-III SE to the actuator The operation check can be performed
MAC KEY writing	-	Write MAC key to ADAS control unit 2
Steering torque calibration	Steering torque calibration	Start the steering torque calibration

NOTE:

Causes of the maximum five cancellations (system cancel) are displayed.
The displayed cancellation causes display the number of the ignition switch ON/OFF up to 254. It is fixed to 254 if it is over 254. It returns to 0 when the same cancellation cause is detected again.