Special Function: Notes

Function name	Special Function items	Description
ECU Information	-	Display the ECU Information number (part number etc.) of the selected system
Actuator Test	-	Send the drive signal from M.U.T.-III SE to the actuator The operation check can be performed
Steering torque calibration	Steering torque calibration	Start the steering torque calibration

NOTE:

Causes of the maximum five cancellations (system cancel) are displayed.
The displayed cancellation causes display the number of the electric motor switch ON/OFF up to 254. It is fixed to 254 if it is over 254. It returns to 0 when the same cancellation cause is detected again.