Remote Engine Start Function
Remote engine start function enables engine to be started from vehicle outside by operating remote engine start button of keyless operation key or cellular phone.
Engine Start Procedures
The following operation enables the engine to be started.
- Perform engine start operation using a cellular phone.
Engine does not start while the vehicle is in the following status.
- All doors are UNLOCK or any door is open.
- Hood is open.
- A registered keyless operation key is in passenger room.
- Shift position is other than P.
- Vehicle security alarm is in operation.
- Hazard light is in operation.
Engine Stop Procedures
The following operation enables the engine to be stopped.
- Press remote engine start button of keyless operation key.
- Perform engine stop operation using a cellular phone.
- Electric motor switch is operated.
Engine stops when the vehicle status changes to the following status.
- 10 minutes are passed since engine start.
- Hood is open.
- Shift position is shifted to a position other than P.
- Vehicle security alarm starts to operate.
NOTE:
While engine is in operation by keyless operation key, engine operation time can be extended for 10 minutes. To extend engine operation time, press LOCK button of keyless operation key, and then within 5 seconds, press and hold remote engine start button of keyless operation key for 2 seconds or more.
Operation Area
The engine can be started when the vehicle is under the following conditions.
- The remote engine start operating range is approximately 60 m (197 ft.) from the vehicle.
- The vehicle is within the communication range of the Infiniti Connection™ data center.