Diagnosis Procedure
- CHECK POWER WINDOW MAIN SWITCH CIRCUIT
- Electric motor switch OFF, and then wait for 3 minutes with driver door open.NOTE:
- Even after electric motor switch is OFF, power is supplied to accessories for a certain amount of timer by the AUTO ACC function.
- When vehicle is operate while on standby, power may be supplied to accessories.
- Disconnect front power window motor (driver side) connector and power window main switch connector.
- Check continuity between front power window motor (driver side) harness connector and ground.
Front power window motor (driver side) - Continuity Connector Terminal D10 1 Ground Not existed Is the inspection result normal?
YES >>
INSPECTION END
NO >>
Repair or replace harness.
- Electric motor switch OFF, and then wait for 3 minutes with driver door open.