Section 106 (Keyless Entry System - (Vehicles Without Keyless Operation System))
WARNING: This page is about a different car, the 2023 Mitsubishi Eclipse Cross. However, it is still accessible from the selected car via links, so may be relevant.
- Special Tools
- Keyless Entry System Diagnosis
- Diagnostic Trouble Code Chart
- Diagnostic Trouble Code Procedures
- DTC B1A08: Keyless/F.A.S.T. key 1 fail; DTC B1A09: Keyless/F.A.S.T. key 2 fail; DTC B1A0A: Keyless/F.A.S.T. key 3 fail; DTC B1A0B: Keyless/F.A.S.T. key 4 fail; DTC B1A0C: Keyless key 5 fail; DTC B1A0D: Keyless key 6 fail; DTC B1A0E: Keyless key 7 fail; DTC B1A0F: Keyless key 8 fail
- DTC B1A10: Keyless/F.A.S.T. key 1 low BATT.; DTC B1A11: Keyless/F.A.S.T. key 2 low BATT.; DTC B1A12: Keyless/F.A.S.T. key 3 low BATT.; DTC B1A13: Keyless/F.A.S.T. key 4 low BATT.; DTC B1A14: Keyless key 5 low battery; DTC B1A15: Keyless key 6 low battery; DTC B1A16: Keyless key 7 low battery; DTC B1A17: Keyless key 8 low battery
- Trouble Symptom Chart
- Symptom Procedures
- INSPECTION PROCEDURE 1: Keyless entry system does not work
- INSPECTION PROCEDURE 2: Keyless entry hazard light answerback function or the dome light answerback function does not work normally
- INSPECTION PROCEDURE 3: The timer lock function does not work after the doors have been unlocked by the keyless entry system
- INSPECTION PROCEDURE 4: Multimode keyless entry system function does not work at all.
- INSPECTION PROCEDURE 5: Power door locks with selective unlocking does not work
- Check At Ecu Terminal
- On-Vehicle Service
- Keyless Entry System Inspection
- Keyless Entry System Timer Lock Function Inspection
- MULTIMODE Keyless Entry Function Check <Vehicles With Electric Retractable Remote Controlled Door Mirrors (Up To 19 Model Year)>
- Power Door Locks With Selective Unlocking Inspection <Vehicles With Electric Retractable Remote Controlled Door Mirrors>
- How To Register Encrypted Code
- Customization Function
- Transmitter