Removal And Installation: Notes
Post-installation operation
- Transmission range switch and control cable adjustment check (Refer to TRANSMISSION RANGE SWITCH CONTINUITY CHECK .)
- Selector lever operation check (Refer to SELECTOR LEVER OPERATION CHECK .)
| Removal steps | |
|---|---|
| • Move the selector lever to the N position. | |
| <<A>> | 1. Selector lever knob |
| • Floor console panel assembly removal (Refer to FLOOR CONSOLE ASSEMBLY .) | |
| 2. Shift indicator panel assembly | |
| • Floor console base, floor console base bracket removal (Refer to FLOOR CONSOLE ASSEMBLY .) | |
| 3. Transaxle control cable connection (selector lever side) | |
| • Connectors and harnesses connections | |
| 4. Selector lever assembly | |
| 5. Selector lever bracket | |
| • Air cleaner case removal (Refer to AIR CLEANER .) | |
| • Battery and battery tray removal (Refer to BATTERY .) | |
| • Control unit cover, SRS-ECU removal (Refer to SRS-ECU .) | |
| 6. Transaxle control cable connection (transaxle side) | |
| 7. Transaxle control cable | |