Data List Reference Table
CAUTION:
- Road test always needs two people: one driver and one observer.
- When shifting the selector lever to "D" position the brakes should be applied so that the vehicle does not move forward.
| Item No. | Check item | Check condition | Normal condition | |
|---|---|---|---|---|
| 4 | Vehicle speed | Road test the vehicle. | The speedometer and scan tool (M.U.T.-IIISE) display the same value. | |
| 57 | Cancel code | Ignition switch: "ON" | The cancel code, which set when the cruise control system was cancelled at the last time, is set again. | |
| 74 | Stoplight switch (for stoplight circuit) | Ignition switch: "ON" | Brake pedal: Depressed | ON |
| Brake pedal: Released | OFF | |||
| 75 | Cancel switch | Ignition switch: "ON" | CANCEL switch: Pressed | ON |
| CANCEL switch: Released | OFF | |||
| 81 | Cruise control operation | Cruise control: active | ON | |
| Cruise control: Inactive | OFF | |||
| 86 | Cruise control ON/OFF switch | Ignition switch: "ON" | Cruise control ON/OFF switch: Pressed | ON |
| Cruise control ON/OFF switch: Pressed again | OFF | |||
| 88 | Neutral position switch (Cruise control) | Ignition switch: "ON" | Selector lever: "N" or "P" position | ON |
| Selector lever: Other than "N" or "P" position | OFF | |||
| 89 | Normally closed brake switch | Ignition switch: "ON" | Brake pedal: Depressed | ON |
| Brake pedal: Released | OFF | |||
| 91 | Resume switch | Ignition switch: "ON" | RES + switch: Pressed | ON |
| RES + switch: Released | OFF | |||
| 92 | Set switch | Ignition switch: "ON" | SET - switch: Pressed | ON |
| SET - switch: Released | OFF | |||