| Detected DTC [PXXXX] |
The engine control component part/control system has a trouble code displayed as PXXXX. (DTC INDEX .) |
| ODO/TRIP METER |
The ODO/TRIP at the moment a malfunction is detected is displayed. |
| Worm up cycle counter |
|
| FUEL SYS-B1 |
- "Fuel injection system status" at the moment a malfunction is detected is displayed.
- One of the following mode is displayed.
- MODE 2: Open loop due to detected system malfunction
- MODE 3: Open loop due to driving conditions (power enrichment, deceleration enleanment)
- MODE 4: Closed loop - using oxygen sensor(s) as feedback for fuel control
- MODE 5: Open loop - has not yet satisfied condition to go to closed loop
|
| FUEL SYS-B2 |
| CAL/LD VALUE [%] |
The calculated load value at the moment a malfunction is detected is displayed. |
| COOLANT TEMP [°C] |
The engine coolant temperature at the moment a malfunction is detected is displayed. |
| L-FUEL TRM-B1 [%] |
- "Long-term fuel trim" at the moment a malfunction is detected is displayed.
- The long-term fuel trim indicates much more gradual feedback compensation to the base fuel schedule than short-term fuel trim.
|
| L-FUEL TRM-B2 [%] |
| S-FUEL TRM-B1 [%] |
- "Short-term fuel trim" at the moment a malfunction is detected is displayed.
- The short-term fuel trim indicates dynamic or instantaneous feedback compensation to the base fuel schedule.
|
| S-FUEL TRM-B2 [%] |
| ENGINE SPEED [rpm] |
The engine speed at the moment a malfunction is detected is displayed. |
| VEHICL SPEED [km/h] or [mph] |
The vehicle speed at the moment a malfunction is detected is displayed. |
| INT MANI PRES [kPa] |
- Constant value is displayed.
- These items are displayed but are not applicable to this model.
|
| ABSOL TH.P/S [%] |
The throttle valve opening angle at the moment a malfunction is detected is displayed. |
| INT/A TEMP SE [°C] or [°F] |
The intake air temperature at the moment a malfunction is detected is displayed. |
| COMBUST CONDITION |
- Constant value is displayed.
- These items are displayed but are not applicable to this model.
|
| FUEL RAIL PRESSURE [MPa] |
The fuel rail pressure at the moment a malfunction is detected is displayed. |
| TARGET FUEL RAIL PRESSURE [MPa] |
The target fuel rail pressure at the moment a malfunction is detected is displayed. |
| BATTERY VOLTAGE [V] |
The battery voltage at the moment a malfunction is detected is displayed. |
| FUEL LEVEL [%] |
The fuel level at the moment a malfunction is detected is displayed. |
| B/FUEL SCHDL [msec] |
The base fuel schedule at the moment a malfunction is detected is displayed |