Work Procedure: Notes
WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
After replacing the ADAS control unit 2 and after replacing or removing the following steering components, the steering torque calibration is necessary to operate the system normally.
- Steering wheel
- Spiral cable
- Steering angle sensor
- Steering column assembly
- Steering gear assembly
NOTE:
Follow the M.U.T.-III SE when performing Steering Torque Calibration. (Steering Torque Calibration cannot be performed without M.U.T.-III SE).