Values On The Diagnosis Tool
WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to M.U.T.-III SE display items.
| Monitor item | Condition | Value/Status | |
|---|---|---|---|
| Current malfunction | When electric motor switch is ON | Displays DTC detected as the current malfunction | |
| PWR SUP MONI | When electric motor switch is ON | 10 - 16 V | |
| Ignition switch | When electric motor switch is ON | ON | |
| MAIN SW | When electric motor switch is ON | When MI PILOT Assist MAIN switch is pressed | ON |
| When MI PILOT Assist MAIN switch is not pressed | OFF | ||
| CANCEL SW | When electric motor switch is ON | When CANCEL switch is pressed | ON |
| When CANCEL switch is not pressed | OFF | ||
| SET/COAST SW | When electric motor switch is ON | When SET- switch is pressed | ON |
| When SET- switch is not pressed | OFF | ||
| RESUME/ACC SW | When electric motor switch is ON | When RES+ switch is pressed | ON |
| When RES+ switch is not pressed | OFF | ||
| DISTANCE SW | When electric motor switch is ON | When DISTANCE switch is pressed | ON |
| When DISTANCE switch is not pressed | OFF | ||
| Switch1 |
NOTE:
The item is displayed, but it is not monitored
|
- | |
| Switch2 | When electric motor switch is ON | When LDP switch is pressed | ON |
| When LDP switch is not pressed | OFF | ||
| BRAKE SW | When electric motor switch is ON | When brake pedal is not depressed | ON |
| When brake pedal is depressed | OFF | ||
| IDLE SW | READY indicator: ON | Idling | ON |
| Except idling (depress accelerator pedal) | OFF | ||
| STOP LIGHT SW |
NOTE:
The item is displayed, but it is not monitored
|
- | |
| DRIVE MODE STATS |
NOTE:
The item is displayed, but it is not monitored
|
- | |
| G (vertical) |
NOTE:
The item is displayed, but it is not monitored
|
- | |
| G (lateral) |
NOTE:
The item is displayed, but it is not monitored
|
- | |
| Vehicle speed | While driving | Almost the same speed as speedometer indication | |
| SET VHCL SPD | When vehicle speed is set | Displays the set vehicle speed | |
| EPS ST angle command value |
NOTE:
The item is displayed, but it is not monitored
|
- | |
| EPS status |
NOTE:
The item is displayed, but it is not monitored
|
- | |
| EPS control request |
NOTE:
The item is displayed, but it is not monitored
|
- | |
| EPS mode switching request | READY indicator: ON | Mode2 | |
| Vibration motor open status | When electric motor switch is ON | Open circuit in steering vibration motor circuit is detected | On |
| Open circuit in steering vibration motor circuit is not detected | Off | ||
| THRTL OPENING | READY indicator: ON | 0 - 100 % | |
| CLUTCH SW SIG |
NOTE:
The item is displayed, but it is not monitored
|
- | |
| Neutral switch |
NOTE:
The item is displayed, but it is not monitored
|
- | |
| Parking brake holding request |
NOTE:
The item is displayed, but it is not monitored
|
- | |
| Parking brake release request |
NOTE:
The item is displayed, but it is not monitored
|
- | |
| Wiper signal | When electric motor switch is ON | When wiper LO is operating | Low |
| When wiper HI is operating | High | ||
| Turn signal | When electric motor switch is ON | Turn signal is OFF | OFF |
| Turn signal LH is operating | LH | ||
| Turn signal RH is operating | RH | ||
| SET DISTANCE | MI PILOT Assist ON and press the DISTANCE switch to change the vehicle-to-vehicle distance setting | When set to "long" | Long |
| When set to "middle" | Mid | ||
| When set to "short" | Short | ||
| Own vehicle mark |
NOTE:
The item is displayed, but it is not monitored
|
- | |
| VHCL AHEAD | Drive the vehicle and activate the vehicle-to-vehicle distance control mode | When a vehicle ahead is detected (vehicle ahead detection indicator ON) | ON |
| When a vehicle ahead is not detected (vehicle ahead detection indicator OFF) | OFF | ||
| Vhcl ahead recognition | Drive the vehicle and activate the vehicle-to-vehicle distance control mode | When a vehicle ahead is detected | OK |
| When a vehicle ahead is not detected | NG | ||
| CRUISE LIGHT |
NOTE:
The item is displayed, but it is not monitored
|
- | |
| CRUISE OPE | Drive the vehicle and activate the vehicle-to-vehicle distance control mode | When MI PILOT Assist system is controlling | ON |
| When MI PILOT Assist system is not controlling | OFF | ||
| MI PILOT assist ON/OFF request |
NOTE:
The item is displayed, but it is not monitored
|
- | |
| FCM SELECT | When electric motor switch is ON | When FCM is ON | ON |
| When FCM is OFF | OFF | ||
| LDW SELECT | When electric motor switch is ON | When LDW is ON | ON |
| When LDW is OFF | OFF | ||
| LDP SELECT | When electric motor switch is ON | When LDP is ON | ON |
| When LDP is OFF | OFF | ||
| Lane Keep Assist [LKA] function select |
NOTE:
The item is displayed, but it is not monitored
|
OFF | |
| FCM SW |
NOTE:
The item is displayed, but it is not monitored
|
- | |
| ACC warning output | When electric motor switch is ON | MI PILOT Assist malfunction message: ON | ON |
| MI PILOT Assist malfunction message: OFF | OFF | ||
| Speed control mode | When electric motor switch is ON | When the vehicle-to-vehicle distance control mode is operating | ACC |
| When the conventional (fixed speed) cruise control mode is operating | ASCD | ||
| When the cruise control mode is OFF | OFF | ||
| SET DISP IND | When electric motor switch is ON | When the vehicle-to-vehicle distance control mode system display is ON | ACC |
| When the conventional (fixed speed) cruise control mode system display is ON | ASCD | ||
| When the cruise control mode system display is OFF | OFF | ||
| LDP system |
NOTE:
The item is displayed, but it is not monitored
|
- | |
| LDP Alive flag | When electric motor switch is ON | LDP system is malfunctioning | ABNML |
| LDP system is normal | NRML | ||
| LDW system | When electric motor switch is ON | When LDW is ON | ON |
| When LDW is OFF | OFF | ||
| Torque sensor value | READY indicator: ON | The measured result of recent steering torque calibration is displayed. | |
| Steering torque (dealer) |
NOTE:
The item is displayed, but it is not monitored
|
- | |
| Steering torque error cause |
NOTE:
The item is displayed, but it is not monitored
|
- | |
| HOD_DetectionArea1 |
NOTE:
The item is displayed, but it is not monitored
|
Unavailable | |
| HOD_DetectionArea2 |
NOTE:
The item is displayed, but it is not monitored
|
Unavailable | |
| HOD_DetectionArea3 |
NOTE:
The item is displayed, but it is not monitored
|
Unavailable | |
| HOD_DetectionArea4 |
NOTE:
The item is displayed, but it is not monitored
|
Unavailable | |
| HOD Mode Status |
NOTE:
The item is displayed, but it is not monitored
|
Hands-off not detected touch | |
| Drive mode SW (Rotary SW) | READY indicator: ON | When the drive mode is NORMAL | Mode 1 (Normal) |
| When the drive mode is TARMAC | Mode 3 (Sport) | ||
| When the drive mode is ECO | Mode 5 (Eco) | ||
| When the drive mode is POWER | Mode 6 (Race) | ||
| When the drive mode is SNOW | Mode 7 (Snow) | ||
| When the drive mode is GRAVEL | Mode 9 (Offroad) | ||
| When the drive mode is MUD | Mode 10 (MUD) | ||
| HEV mode SW | READY indicator: ON | When the EV mode is NORMAL | Auto mode activated |
| When the EV mode is EV | ZEV mode activated | ||
| When the EV mode is CHARGE | Charge Battery | ||
| When the EV mode is SAVE | Save Battery level activated | ||
| EV priority mode SW | READY indicator: ON | When the EV mode is EV | ON |
| When the EV mode is other than EV | OFF | ||
| System Ready status (w/HEV) | When electric motor switch is ON | READY indicator: ON | ON |
| READY indicator: OFF | OFF | ||