LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2024 >> Outlander PHEV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (ADAS Control Unit) >> System Description >> Diagnosis System (ADAS Control Unit 2) >> M.U.T.-III SE Function (ICC/ADAS 2) >> Data List
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data List

WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to M.U.T.-III SE display items.
MONITORED ITEM DESCRIPTION

Monitored item [Unit] ALL SIGNALS Description
Current malfunction x Indicates DTC detected as the current malfunction
PWR SUP MONI [V] x Indicates the ADAS control unit 2 power supply voltage
Ignition switch [ON/OFF] x Indicates [ON/OFF] status of the electric motor switch
MAIN SW [OFF/ON] x Indicates [ON/OFF] status as judged from MI PILOT Assist steering switch
CANCEL SW [OFF/ON] x Indicates [ON/OFF] status as judged from MI PILOT Assist steering switch
SET/COAST SW [OFF/ON] x Indicates [ON/OFF] status as judged from MI PILOT Assist steering switch
RESUME/ACC SW [OFF/ON] x Indicates [ON/OFF] status as judged from MI PILOT Assist steering switch
DISTANCE SW [OFF/ON] x Indicates [ON/OFF] status as judged from MI PILOT Assist steering switch
Switch1 [OFF/ON] x
NOTE: The item is displayed, but it is not monitored
Switch2 [OFF/ON] x Indicates [ON/OFF] status of LDP switch
BRAKE SW [OFF/ON] x Indicates [ON/OFF] status as judged from brake switch signal (BCM transmits brake switch signal through CAN communication)
IDLE SW [OFF/ON] x Indicates idle position [ON/OFF] judged from accelerator pedal position signal (ECM transmits accelerator pedal position signal through CAN communication)
STOP LIGHT SW [OFF/ON] x
NOTE: The item is displayed, but it is not monitored
DRIVE MODE STATUS [NRML/ECO/SPORT/RACE] x
NOTE: The item is displayed, but it is not monitored
G (vertical) [G] x
NOTE: The item is displayed, but it is not monitored
G (lateral) [G] x
NOTE: The item is displayed, but it is not monitored
Vehicle speed [km/h (mph)] x Indicates vehicle speed as judged from vehicle speed signal [ABS actuator and electric unit (control unit) transmits vehicle speed signal through CAN communication]
SET VHCL SPD [km/h (mph)] x Indicates set vehicle speed memorized in ADAS control unit 2
EPS ST angle command value [deg] x
NOTE: The item is displayed, but it is not monitored
EPS status [State1/State2/State3] x
NOTE: The item is displayed, but it is not monitored
EPS control request [OFF/ON] x
NOTE: The item is displayed, but it is not monitored
EPS mode switching request [Mode1/Mode2] x Indicates which ADAS function the EPS is corresponding to.
Vibration motor open status [OFF/ON] x Indicates steering vibration motor open status
THRTL OPENING x Indicates throttle position judged from accelerator pedal position signal (ECM transmits accelerator pedal position signal through CAN communication)
CLUTCH SW SIG [OFF/ON] x
NOTE: The item is displayed, but it is not monitored
Neutral switch [OFF/ON] x
NOTE: The item is displayed, but it is not monitored
Parking brake holding request [OFF/ON] x
NOTE: The item is displayed, but it is not monitored
Parking brake release request [OFF/ON] x
NOTE: The item is displayed, but it is not monitored
Wiper signal [Low/High] x Indicates wiper status judged from front wiper status signal (BCM transmits front wiper status signal through CAN communication)
Turn signal [OFF/LH/RH] x Indicates wiper status judged from turn indicator signal (BCM transmits turn indicator signal through CAN communication)
SET DISTANCE [Long/Mid/Short] x Indicates set distance memorized in ADAS control unit 2
Own vehicle mark [OFF/ON] x
NOTE: The item is displayed, but it is not monitored
VHCL AHEAD [OFF/ON] x Indicates [ON/OFF] status of vehicle ahead detection indicator output
Vhcl ahead recognition [NG/OK] x Indicates vehicle ahead detection status by each sensor
CRUISE LIGHT [OFF/ON] x
NOTE: The item is displayed, but it is not monitored
CRUISE OPE [OFF/ON] x Indicates whether controlling or not (ON means "controlling")
MI PILOT assist ON/OFF request [OFF/ON] x
NOTE: The item is displayed, but it is not monitored
FCM SELECT [OFF/ON] x Indicates an [ON/OFF] state of the FCM system
LDW SELECT [OFF/ON] x Indicates an [ON/OFF] state of the LDW system
LDP SELECT [OFF/ON] x Indicates an [ON/OFF] state of the LDP system
Lane Keep Assist [LKA] function select [OFF/ON] x Indicates an [ON/OFF] state of the Lane Keep Assist [LKA] system
FCM SW [OFF/ON] x
NOTE: The item is displayed, but it is not monitored
ACC warning output [OFF/ON] x Indicates MI PILOT Assist malfunction message status
Speed control mode [OFF/ACC/ASCD] x Indicates cruise control mode status
SET DISP IND [OFF/ACC/ASCD] x Indicates MI PILOT Assist display status
LDP system [OFF/ON] x
NOTE: The item is displayed, but it is not monitored
LDP Alive flag [Abnormal (functionstandstill)/NORMAL] x Indicates LDP system status
LDW system [OFF/ON] x Indicates LDW system status
Torque sensor value [Nm] x Indicates the measured result of recent steering torque calibration.
Steering torque (dealer) [Nm] x
NOTE: The item is displayed, but it is not monitored
Steering torque error cause x
NOTE: The item is displayed, but it is not monitored
HOD_DetectionArea1 [Unavailable/Hands-on detected/Hands-off detected/Error] x
NOTE: The item is displayed, but it is not monitored
HOD_DetectionArea2 [Unavailable/Hands-on detected/Hands-off detected/Error] x
NOTE: The item is displayed, but it is not monitored
HOD_DetectionArea3 [Unavailable/Hands-on detected/Hands-off detected/Error] x
NOTE: The item is displayed, but it is not monitored
HOD_DetectionArea4 [Unavailable/Hands-on detected/Hands-off detected/Error] x
NOTE: The item is displayed, but it is not monitored
HOD Mode Status [Not used/Hands-off not detected touch/Hands-off not detected grip/EnergySavingMode/Hands-off detected/Hands-off not available/Hands-off Error/Signal invalid] x
NOTE: The item is displayed, but it is not monitored
Drive mode SW (Rotary SW) [Mode 1 (Normal)/Mode 2/Mode 3 (Sport)/Mode 4/Mode 5 (Eco)/Mode 6 (Race)/Mode 7 (Snow)/Mode 8/Mode 9 (Offroad)/Mode 10 (MUD)/Mode 11/Mode 12/Mode 13/Mode 14/Mode 15] x Indicates the drive mode status.
HEV mode SW [No display/ZEV mode activated/Auto mode activated/Charge Battery/Sport mode activated/Temporary no ZEV/Save Battery level activated] x Indicates the EV mode status.
EV priority mode SW [OFF/ON] x Indicates whether the EV priority mode is enabled.
System Ready status (w/HEV) [OFF/Ready] x Indicates the power supply mode of the vehicle.