Work Procedure
WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM ECM RECOMMUNICATING FUNCTION
- Install ECM.
- Contact backside of the registered keyless operation key* to electric motor switch while brake pedal is depressed, then turn electric motor switch ON.
*: To perform this step, use the key that is used before performing ECM replacement.
- Maintain electric motor switch in the ON position for at least 5 seconds.
- Turn the power supply mode of the electric motor switch to OFF.
- Check that the engine starts.
>>
GO TO 2.
.
- PERFORM ADDITIONAL SERVICE WHEN REPLACING ECM
Refer to Description REMOVAL AND INSTALLATION .
>>
END