Confirmation Procedure
WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Turn the power supply mode of the electric motor switch to ON.
- Check DTC in "Diagnostic Trouble Code" mode of "HANDS FREE MODULE" using scan tool (M.U.T.-III SE).
Is DTC detected?
YES >>
Refer to DTC DIAGNOSIS PROCEDURE .
NO-1 >>
To check malfunction symptom before repair: Refer to Intermittent Incident INTERMITTENT INCIDENT .
NO-2 >>
Confirmation after repair: INSPECTION END