Confirmation Procedure
WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Press electric motor switch under the following conditions and wait 1 second or more.
- Selector lever: In the P position.
- Brake pedal: Depressed.
- Select "Diagnostic Trouble Code" mode of "BCM" using scan tool (M.U.T.-III SE).
Is the DTC detected?
YES >>
Refer to DTC DIAGNOSIS PROCEDURE .
NO-1 >>
To check malfunction symptom before repair: Refer to Intermittent Incident INTERMITTENT INCIDENT .
NO-2 >>
Confirmation after repair: INSPECTION END
- Press electric motor switch under the following conditions and wait 1 second or more.