Component Inspection

WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.

CHECK STARTER CUT RELAY

Turn the power supply mode of the electric motor switch to OFF.
Disconnect starter cut relay.
Check continuity between starter cut relay terminals.

Starter cut relay		Condition	Continuity
Terminal		Condition	Continuity
6	7	12 V direct current supply between terminals 8 and 9	Existed
6	7	No current supply	Not existed

Is the inspection result normal?

YES >>

INSPECTION END

NO >>

Replace starter cut relay.